To pitch a tarp in porch mode, tie off one long edge of the tarp at waist height between two anchor points, then stake the opposite edge down low and angled outward. This creates an open-front awning that keeps rain off your gear while leaving the sides and front wide open for airflow and easy…
The easiest way to choose a tarp size for a hammock is to pick one that’s at least 2 feet longer and wider than your hammock. For most standard hammocks, that means a tarp around 10 to 12 feet long. This gives you enough coverage to block rain and wind from every angle. But size…
An 11 foot hammock tarp is a rain fly or overhead cover designed to shelter an 11-foot hammock from rain, wind, and sun. It measures about 11 feet along its ridgeline, giving you enough coverage to protect both the hammock and your gear underneath. Think of it as the roof over your hanging bed. So…
Stakes for a hammock tarp are the anchors you drive into the ground to hold your tarp’s guylines taut and steady. Without them, your tarp can sag, flap, or blow away the moment the wind picks up. In short, they’re what keep your rain coverage actually working. If you’re still deciding whether a tarp is…
The best way to guy out a hammock tarp is to stake the corners at a 45-degree angle, then tighten each guy line so the tarp pulls taut with a slight drip edge at the ridge. Done right, this keeps rain off your hammock and stops the tarp from flapping all night. It takes about…
To tension a hammock tarp, stake out the ridgeline ends at an angle, then pull each guy line tight and secure it to a tree or stake. Work from the middle outward, adjusting the ridge line first, then the side guys. A drum-tight tarp means no flapping, no puddles, and no surprise showers in your…
The easiest way to set a tarp ridgeline is to tie a strong cord or rope between two trees, then drape your tarp over it and secure the ends. The ridgeline is simply the center line that holds your tarp up and gives it that classic A-frame shape. Get it tight and level, and everything…
A continuous ridgeline is a fixed rope strung between two anchor points, like trees, that runs the full length of your tarp. Your tarp then attaches to this ridge line using prusik knots or hooks, letting it slide and adjust easily. Think of it as the backbone that holds everything up. Why bother with one?…
The easiest way to attach a tarp to hammock suspension is to use beckett hitch knots or ridgeline connections that hook your tarp directly to your suspension lines. This lets your tarp move with the hammock and keeps rain, wind, and bugs away from you. You don’t need fancy tools, either. Just a few simple…
Pitching a tarp in storm mode means setting it up with a low, angled profile so wind and rain slide off instead of pooling or ripping it apart. You pitch it steep, stake it tight, and keep the wind side low to the ground. Done right, your tarp can handle weather that would flatten a…